Products
Unit C3, Court 2000 Industrial Estate
Bridgnorth Road, Madeley
Telford, Shropshire,
TF7 4QR.
Tel: 01952 684107
Vat Reg: GB 813 1965 36
Bridgnorth Road, Madeley
Telford, Shropshire,
TF7 4QR.
Tel: 01952 684107
Vat Reg: GB 813 1965 36
Industrial Adhesive Tapes
Masking and Protection Products
High Temp Masking Discs
Polyimide Masking discs are available in a wide variety of sizes from 5 mm up to 150 mm in 1 mm increments.
Masking Discs are also sometimes referred to as, masking dots, masking spots, spot faces or washers.
Crepe Paper Masking Discs
Crepe paper masking discs are ideal for masking products in processes which require cure temperatures up to 200 deg C
Crepe paper masking discs can be used for masking in wet spray applications, synthetic enamels, cellulose and acrylic paints. It will remove cleanly while it is still warm to the touch.
Crepe paper masking discs are ideal for masking products in processes which require cure temperatures up to 200 deg C
Crepe paper masking discs can be used for masking in wet spray applications, synthetic enamels, cellulose and acrylic paints. It will remove cleanly while it is still warm to the touch.
Polyester Green Masking Discs
Polyester green masking discs are manufactured from the highest quality polyester masking tape and they are coated with a high performance silicone adhesive that allows clean removal from coated surfaces after a high temperature cure cycle.
Polyester green masking discs are manufactured from the highest quality polyester masking tape and they are coated with a high performance silicone adhesive that allows clean removal from coated surfaces after a high temperature cure cycle.
Polyester green masking discs come on a split backing for easy removal and are designed for masking products in temperatures up to 210 deg C. They are suitable for use in Powder Coating, E Coating, Wet Spray Painting, Anodising & Other finishing applications which require high temperature cure cycles.
Polyimide Amber Masking Discs
Electrical Grade Polyimide amber masking discs, with a pre cured pressure sensitive silicone adhesive. This product can perform at extreme temperatures and the adhesive will thermo set to increase adhesion values. They will withstand temperatures in excess of 300 deg C and give good resistance to a variety of chemicals and solvents.
Electrical Grade Polyimide amber masking discs, with a pre cured pressure sensitive silicone adhesive. This product can perform at extreme temperatures and the adhesive will thermo set to increase adhesion values. They will withstand temperatures in excess of 300 deg C and give good resistance to a variety of chemicals and solvents.
Polyimide Masking Discs have a high dielectric and insulation resistance. Polyimide Amber Masking Discs are commonly used masking products in the automotive and aerospace industries and are excellent for masking printed circuit boards for conformal coating or wave soldering
Masking Discs
Masking Discs